Frosty – Unveiling

the unveiling of Frosty the Snowman

the unveiling of Frosty the Snowman

Tonight was the official unveiling of my candy covered sculpture inspired by Frosty the Snowman. At about 6:30 p.m. with a gathering of family and friends and the crew of Cold Stone Creamery we remove the butcher paper covering my snowman. It was fun to see every ones reactions. All seemed to enjoy it. I loved it when a young toddler pulled up a chair so he could see the window better. The owner of Cold Stone organized a scavenger hunt to encourage everyone who came to see South Jordan‘s Light the Night to see all the candy window. By going to the 5 stores and turning in your sheet you got a free small ice cream cone. It was a great idea and lots of people took advantage of it. It made the night that much more fun.

https://i1.wp.com/raelynwebster.smugmug.com/Holidays/South-Jordan-2012/Something-Sweet/i-vhPm4vf/0/L/P1040189-L.jpg

I didn’t get any close up shots taken of my window. I’ll have to go back and get some more pictures taken and post them here. Tonight was more about enjoying the experience than taking photos.

50 for 50 #47 – Build a Snowman

Frosty looking out the Cold Stone window

When I made a list of things I might like to do to celebrate turning 50 years old this year, I didn’t think that “build a snowman” would be a snowman out of candy. But that is how it turned out. If you have followed my blog much you know that I’ve built Frosty for several months now. Well today he is official built! I finished installing him in the window at Cold Stone Creamery on Redwood Road in South Jordan. He looks good and I’m excited for the unveiling tomorrow night. I won’t be cold but they are forecasting some rain. Hopefully it won’t come until after the unveiling. The install went fairly smoothly. A few little glitches but nothing major. It is amazing how tired I feel now that it is all in. I’ll post some photos of the completed window after the unveiling tomorrow night.

some of the miniature figures in the Frosty window

Frosty Update

Sorry to be slow about posting today. I’m in the middle of installing my candy sculpture Frosty the Snowman. The unveiling is Friday night at 6:30 p.m. at the Cold Stone on Redwood Road in South Jordan, Utah. If you live in the area, come and join the fun. South Jordan has lots of fun stuff planned to kick off the holiday season. He is looking good so far. I can’t wait to see all the parts and pieces come together. I’ll post some photos soon.

 

Frosty Update – final base shaping

I finally got the base of the shadow box that is being built to hold my candy sculpture. Even though I had done some shaping of the base there was lots more to do to make the whole thing work. It was nice outside on Saturday while I was working on it on our driveway. It looked like we had a snowstorm with all the little white bits of Styrofoam that collected around me.

It was exciting to put most of the pieces together and get a feel for how it was all coming together. I had some concerns that maybe Frosty wouldn’t fit in the window. But though it looks to be a bit tight in a couple of places I think we are going to be fine. I’m happy with how things are coming together and I feel like there is real hope I can get this done with out pulling some all nighters. Just 3 1/2 weeks to the unveiling!

Frosty Progress Report

Frosty’s hat

It has been awhile since I posted about my candy sculpture project for Christmas. While I’m behind my original schedule I think it will be ok. The biggest obstacle as the moment is getting the box structure and backdrop for the window. I need it to properly size the base and to do the sky that goes in one panel of the backdrop. It is too bad that I’ve missed the nice weather this week to get the base and the sky done. I’m using silicone caulk at I prefer to do it in the garage so the fumes don’t stink up the house. I’ll soon be stopped from progressing if I don’t have the box.

almost finished broom with pins to hold the licorice in place

The status on all the parts and pieces:

  • Frosty (finished)
  • Hat (finished)
  • Bow tie (finished)
  • Broom (almost finished)
  • Trees (started)
  • Small figures (ready to start)
  • Village (need to design)
  • Base (ready for final sizing – waiting for box)
  • Sky (need black caulk and backdrop)
  • Large snowflakes (need to design) (this is my last priority)

I’m hoping that putting the Jelly Belly’s on the base and the backdrop will go pretty quickly. They don’t need precise placement and if needed I can recruit some helpers. I would like to wait to design the village until I get the box and exact sizing for the base. It feels good to have Frosty done. He is the most important part of the window. The rest is support for him. I now know I will find a way to get this done even if I don’t get all the parts I’d like to get done.

 

Frosty Shaping

 

Frosty with no arms

Over the last couple of weeks I’ve been working on getting all the construction phase of my “Frosty” project done. The deadline I set myself was September 8th but I didn’t make that. Other project with a closer due date took priority. But I think I’ve finally got Frosty built and ready to start putting candy on.

Frosty with “skinny” legs

I ran into a couple of snags. His body shaping went pretty good but I was concerned about how skinny his legs turned out. After shaping his left arm I even more concerned because it just didn’t work. But I went on to the right arm and I was happy with that so using that as a reference I did the left arm over and it was better. With both arms done it was obvious that his legs were too skinny. Frosty is a really short and tubby snowman and the legs he had just visually couldn’t hold him up. So with Bill’s help we performed surgery. We cut of the inside half of both his legs and feet. After added in a couple of inches of Styrofoam, we glued the him back together. After more than 24 hours of drying, I reshaped his legs. Now they are much better.

[I will insert a photo of Frosty with his new legs as soon as I get one taken]

I also go his hat, bow tie and broom all ready for candy. Last Friday I actually put the candy on Frosty’s bow tie. It helped me feel a little better about being behind my schedule because at least I started putting candy on. I’m happy with how Frosty is coming so far. There is a fun quirkiness about his shape that I hope will be enhanced as he moves forward in the process.

candy covered bow tie

Candy on bow tie: Tart ‘n’ Tiny (red), Gum Balls (purple & green), Runts (orange)

 

Official start to Frosty

rough shaping of Frosty

Today I made an official start on my candy sculpture for South Jordan‘s “Something Sweet” Christmas window displays. For those of you who were lucky enough to grow up in the Salt Lake area during ZCMI‘s famous Christmas window displays you will be excited to know that the city of South Jordan is working to restore that Christmas tradition. After a google search I came up with this link to a few images from Christmas 1998.

When ZCMI was sold the new company didn’t have the in-house designers to continue the tradition and then Provo City Arts Council started sponsoring candy windows in various Center Street businesses. I got involved with that project in 2001 and continued making windows for them until 2007 when I started to raise puppies for Guide Dogs for the Blind. Provo had candy windows in 2008 and then with the change in focus with the new Covey Center for the Arts the Christmas candy windows in Provo came to an end.

Last year South Jordan approached me about doing a candy sculpture for them to kind of get things started on reviving the Candy Window tradition. Because I would love to see this wonderful holiday event make a come back I said yes. You can see my “Christmas A to Z” project here. This year is the next step in bringing back Candy Windows. South Jordan will have 4 candy window sculptures in the Town Center Drive area just off Redwood Road and south of 104th South. I’m also excited because one of the candy artist comes to us with experience doing the original windows at ZCMI. My sculpture will be in the Cold Stone Creamery. Our theme is Christmas Carols and with my window being in an ice cream shop “Frosty the Snowman” seemed like the perfect match.

So here are a few photos of Frosty starting to take shape. We gained a lot of expertise from Gary’s many years at ZCMI and he let us use his big hot-wire cutters to cut the rough shape out of big blocks of Styrofoam. This is so much faster than how I’ve done it in the past. Bill is planning to make me a smaller hot-wire cutter but he hasn’t had time yet. So much more to do and after I get Girls Camp finished this project will have to take some priority.

Gary and Bill making the first cut to shape Frosty

making the second cut on Frosty

 

the second cut finished

 

close-up of the third cut on Frosty

 

nearing the end of the fourth cut

cutting out Frosty’s legs

more rough shaping of Frosty

Frosty strapped into the back of the pick-up for the trip to our house